Electricity, Gas and Water When You Shift House in Pakistan
Google Instant fills in “house shifting” with electricity, gas, and the meter because families get this wrong more often than they get the truck wrong. The furniture leaves. The old house still has your name on a bill, or the new house has someone else’s arrears on the connection. You stand in the dark on the first night with a working sofa and no light.
Movers do not transfer a WAPDA, K-Electric, Sui, or WASA account. You do that with the company that printed the last bill. This page is the order of work around loading day, not a substitute for the form at your local office. The society gate pass is a separate job: prepare the fridge and the society gate pass.
The meter is one job. What stays off the truck is another: what not to pack on a house shifting truck in Pakistan.
Photograph Both Meters on Moving Day
On the morning you leave, take a clear photo of the electricity meter reading, the gas meter if you have piped gas, and the water meter if the house has one. Do the same at the new house before you switch anything on. Write the numbers in a notebook as well. If a bill arrives for units you did not use, those photos are the only proof you have.
Keep the Last Paid Bills
A transfer or a final bill usually needs a copy of the last paid bill, your CNIC, and proof that you may occupy the house: a rent agreement, an allotment letter, or ownership papers. Tenants often need a short NOC from the landlord. Offices change the exact list. Take what you have and ask the clerk what is missing, rather than guessing from a blog.
Electricity: Close or Transfer, Do Not Ignore
Each city sits under a different company: IESCO around Islamabad and Rawalpindi, LESCO in Lahore, K-Electric in Karachi, MEPCO in much of south Punjab, and others elsewhere. Some people apply for a name change on the same meter. Others ask for a final reading and a new connection at the next house. Both start with a cleared bill. Unpaid arrears sit on the connection. The company can refuse a transfer until someone pays, even if the debt is not yours.
What You Can Do Before Loading Day
- Download or photograph the last three bills
- Ask the landlord whose name is on the meter
- Visit or call the subdivision / customer centre that printed your bill
- Ask whether you need a final bill, a name change, or a new connection
- Do not wait until the truck is at the gate
Do Not Leave the Main Breaker as a Secret
Show someone in the crew where the main switch is if they need light to finish a room. Then, when the last carton is on the truck, switch off what you are meant to switch off. A house left with every breaker on and the door open is how a bill keeps running after you have left.
Gas: Sui Line and Cylinders Are Different Jobs
Piped gas (SNGPL in much of the north, SSGC in much of the south) is an account, like electricity. Name change or disconnection needs the last bill, CNIC, and property or tenancy papers. Confirm the current list at the regional office or the company’s published page. There is often no fee for a simple name change, but that is the company’s rule, not a promise in this article.
Geyser, Stove and the Fitter
A house shift is when people pull a geyser pipe themselves and then smell gas at the new house. Get a qualified fitter to disconnect and to reconnect. Do not throw an LPG cylinder on the furniture truck. Cylinders travel apart, upright, and only if the mover has agreed in writing. If they will not take it, that is a safety decision, not a delay.
Water and Internet
WASA or the local water board is the same pattern: last bill, reading, and an application. Internet and PTCL are easier to forget and slower to restore. Start the new address a few days before you move if you need a line for work. The truck will not wait for a technician.
The New House on the First Night
Before you pay the crew and they leave, test lights, fans, a tap, and the geyser if it is already fitted. If the connection is dead, that is a utility office problem, not a packing problem. Keep jewellery, passports and medicines with you, not in a carton. The house-shifting planner is for volume. This page is for the accounts that outlive the truck.
Conclusion
A clean house shift in Pakistan is furniture plus three photographs: electricity, gas, and water. Start the transfer or final bill before loading day, keep the last paid bills, and use a fitter for gas appliances. Then book the truck. House shifting: +92 312 6939758. See house shifting services, Islamabad, Lahore and Karachi.
Frequently Asked Questions
Do packers and movers transfer electricity in Pakistan?
No. You apply at your DISCO or K-Electric with the last bill and your CNIC. The mover only needs light on loading day.
Should I photograph the meter when I shift house?
Yes. Photograph electricity, gas and water at both houses and keep the last paid bills. That is your proof if a later bill looks wrong.
Can I leave the old connection in my name?
You can, but you stay liable for units used after you leave. Close or transfer it.
Who disconnects the geyser?
A qualified gas fitter, not the furniture crew. Do not put an LPG cylinder on the household truck unless the quote says so.
Is this the same as the society gate pass?
No. The gate pass lets the truck in. The meter work is with the utility company.
When should I start?
A few days before the truck, not on the morning of the shift. Offices are closed on some weekdays and you need the last bill in your hand.